How to Choose the Right Preservation of Jabon Wood to Prevent Insect Damage - Navigasi Berita a -->
Skip to content Skip to sidebar Skip to footer

How to Choose the Right Preservation of Jabon Wood to Prevent Insect Damage

Navigasi - Preservation of jabon wood is needed to help prevent destructive insect attacks. The use of preservatives must also be ensured using the right product.

How to Choose the Right Preservation of Jabon Wood to Prevent Insect Damage
How to Choose the Right Preservation of Jabon Wood to Prevent Insect Damage

In the process of preserving jabon wood, it is equally important to pay attention to the method or method of preservation that is carried out. To find out more about this information, see the explanation in this article.

The Importance of Preserving Jabon Wood

One of the organisms that is the main focus of the application of jabon wood preservation as other wood in general is insects or insects.

This group of organisms varies greatly from termites to powder beetles. In general, jabon is relatively resistant to insects.

This wood is classified as class II wood in terms of its resistance to termites. While the attack of powder beetles such as teter is relatively rare in Jabon.

However, we should not be careless. Like the preservation of teak wood, preservation of jabon wood is also crucial because the threat of insects, although small, is still there.

For example, if we only have furniture made of wood in our house, the insects will automatically have no other choice so that in the end they still damage the jabon.

Imagine this happening similarly to a wood processing company that stores large quantities of jabon in the same warehouse area. Automatically, the potential for insect attack should not go unnoticed.

Application of Anti-Insect Treatment for Jabon Wood

To deal with this situation, business actors usually apply special treatments to prevent wood destroying insects.

One of them is by immersing insect repellent or insecticide into the jabon material so that the material is protected from various pests that attack.

For those of you who are interested in applying this step, choose a drug that is able to work well. Your efforts will be in vain if you buy the wrong insecticide product.

Our advice, use an insect repellent Biocide Insecticide 100 EC. Because in addition to proven effective in preventing destructive insects.

This drug is also safer for workers and can be applied in various ways, including mixed with antifungal Biocide Wood Fungicide.

Jabon Wood Preservation Method

Jabon preservation treatment itself can later be done by several methods, ranging from mastering, soaking, immersion, to the vacuum press method.

Mastery method

This method is the easiest and most often done. Because it only requires a brush and a thinner, namely water.

Vacuum press method
Is a method of impregnating the preservative drug solution. This method is carried out in a room where the pressure and air content can be adjusted.

Immersion method

This method was mostly used, especially a few decades ago, when the technology was not very sophisticated and there was still a lot of vacant land for the soaking area. Remembering to do immersion requires a large location.


This method is at first glance similar to the immersion method. It's just that the process does not take long. Just dip and lift. So it is also similar to the mastering method because it does not need to be soaked.

Of the four methods, Biocide Insecticide products can be used by applying all the methods mentioned.

So that the impregnation of the preservative solution can be controlled properly. The four methods have their respective advantages and disadvantages.

In terms of effectiveness, for example, the compressed vacuum system is the best. But in terms of cost, this method is the most expensive.

Preservation of Jabon Wood at the Wood Processing Stage

At the stage of wood processing, the preservation of jabon wood can be carried out in several stages. The first is after the wood is cut down, while the second is after the wood is sawed at once before the wood is kiln-dried.

For treatment applications after the wood is cut, you simply dissolve the insect repellent according to the recommendations and then apply it to the outer part of the wood.

This method is actually more of an "emergency" because the wood that has just been cut is very vulnerable to pests if it is not immediately dried and given medication.

As for the second application, you can choose from four methods from brushing to vacuum pressing.

As mentioned above, each method has its own advantages and disadvantages. So choose wisely according to your needs and field conditions.

As a recommendation, of course you can rely on Biocide Insecticide products for your jabon wood preservation needs and for other types of wood.